News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: reverse light switch  (Read 1037 times)

    Offline jordan

    • Full Member
    • ***
    • Posts: 601
    • no replacement for displacement
    reverse light switch
    « on: July 10, 2014 - 01:03:12 AM »
    I am trying to wire in my reverse light switch into my Keisler A41 4l60e transmission.  I don't know where the factory wires are, or anything about where they go through the floor or dash to get to the trans.  I removed my 727 a couple of years ago and it is long gone, so i don't have a reference.  Is there a harness that I can buy, and if so, where does it connect to the main harness?  Somewhere in the dash, or in the rear harness?  Any help is appreciated. 
    Logged
    "Don't brake until you see God!"


    Offline jordan

    • Full Member
    • ***
    • Posts: 601
    • no replacement for displacement
    Re: reverse light switch
    « Reply #1 on: July 12, 2014 - 10:41:19 AM »
    OK.  Pretend I have a 727, and I want to connect the reverse light switch.  Is there a harness to connect it too?  Does anybody have reverse lights?  I don't want my application to scare anybody away from knowing where the switch connects to.  Thanks guys.   J
    Logged
    "Don't brake until you see God!"

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: reverse light switch
    « Reply #2 on: July 12, 2014 - 06:30:32 PM »
    It connects through the bulkhead connector. It is one of the small four wire bulkhead connectors. I believe you can buy that harness if you don't want to make your own. Fairly cheap i think.
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline dfrazz

    • 1970 Cuda - 1968 Charger
    • Resident
    • *****
    • Posts: 4070
    Re: reverse light switch
    « Reply #3 on: July 12, 2014 - 07:10:12 PM »
    The two black wires from the neutral safety switch in the 727 connect to the reverse light switch then to the bulk head.  The brown/yellow wire from the neutral safety switch connects to the starter relay.   
    Logged
    Pages: [1]
    « previous next »