73 Cuda, 340, TTI headers, fast ratio will fit

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 73 Cuda, 340, TTI headers, fast ratio will fit  (Read 2923 times)

    Offline crash340

    • Sr. Member
    • ****
    • Posts: 1291
    73 Cuda, 340, TTI headers, fast ratio will fit
    « on: July 19, 2014 - 07:09:49 PM »
    Guys and Gals, I can confirm that TTI headers will fit with plenty of clearance a 73, Cuda smallblock, fitted with fast ratio arms, the headers are a good 1" away from the steering. I'll post pics later. TTI's website say you have to slightly dent a tube, their helpline say no denting will fit. So, I can confirm they do. I picked up my fast ratio arms from Firm Feel if that makes any difference, assume all arms are much the same.

    Greg :aussie:
    Logged
    Greg

    73 Cuda
    Brisbane, Australia


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: 73 Cuda, 340, TTI headers, fast ratio will fit
    « Reply #1 on: July 21, 2014 - 06:07:43 PM »
    Good to know  :2thumbs:
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline HP_Cuda

    • Hit the skinny little pedal on the right!
    • Sr. Resident
    • ******
    • Posts: 5268
    • Mopar or No Car!
    Re: 73 Cuda, 340, TTI headers, fast ratio will fit
    « Reply #2 on: July 21, 2014 - 06:08:52 PM »

    Wish that were the case for the Big Block cause that would be the direction I would have headed.

     :bricks1:
    Logged
    1970 Cuda Clone 440 4 speed - sublime green
    1970 Cuda 383 4 speed - yellow - SOLD

    Offline Mopar Mitch

    • Autocrosser/Road Course Racer
    • Full Member
    • ***
    • Posts: 682
    Re: 73 Cuda, 340, TTI headers, fast ratio will fit
    « Reply #3 on: July 22, 2014 - 10:51:40 AM »
    Which SB part number TTi headers did you install?  Aren't there different models of TTi headers for each engine?   Big tube, small tube, stepped tube, long, short?   Eventually I'll need to replace my Hooker Comp headers (1-3/4" tubes, equal-length tuned pipes)... they hang a little low, and with my car already lowered, and doing more street/hwy driving, I need a little more ground clearance... but I still want the best headers.. favorably "tuned, equal lenght design".   I do pylon autocross and more often for the future hi-speed road course lapping sessions/HSAX.  T/Anks ahead!
    Logged
    Autocross/road racers go in deeper... and come out harder!

    See  MOPAR ACTION MAGAZINE, AUGUST 2006 ISSUE for featured article and details on my autocross T/A.

    Offline crash340

    • Sr. Member
    • ****
    • Posts: 1291
    Re: 73 Cuda, 340, TTI headers, fast ratio will fit
    « Reply #4 on: July 22, 2014 - 03:23:38 PM »
    MM,
    TTI340BE-C4, you make a good point, there are other TTI part numbers, ones for the W2 heads, Larger pipe diam and so on. IF they follow thes same path even the larger tubes should be well clear pics below





    Greg
    Logged
    Greg

    73 Cuda
    Brisbane, Australia

    Offline Mopar Mitch

    • Autocrosser/Road Course Racer
    • Full Member
    • ***
    • Posts: 682
    Re: 73 Cuda, 340, TTI headers, fast ratio will fit
    « Reply #5 on: July 24, 2014 - 11:44:28 AM »
    Thanks for the reply.  Very nice clean pics, too!  When you get it down to the ground, maybe you could take a cpl more pics showing the ground clearance?... most appreciated.

    T/Anks again!
    Logged
    Autocross/road racers go in deeper... and come out harder!

    See  MOPAR ACTION MAGAZINE, AUGUST 2006 ISSUE for featured article and details on my autocross T/A.

    Offline cudamadd

    • Sr. Member
    • ****
    • Posts: 1070
      • cudamad157071@gmail.com
    Re: 73 Cuda, 340, TTI headers, fast ratio will fit
    « Reply #6 on: July 30, 2014 - 02:15:19 AM »
    Nice pictures Greg , they look great   :smokin:
    Logged
    Go 4 a spin Ya Why Not.

    Offline 360FISH

    • Full Member
    • ***
    • Posts: 705
    • BS23H3B567746
    Re: 73 Cuda, 340, TTI headers, fast ratio will fit
    « Reply #7 on: July 30, 2014 - 04:11:32 PM »
    Very timely... I'm fixing to put TTi on my '73 small block.

    Thank you
    Logged
    1973 ‘Cuda   Semi-Pro Touring
    360 SB - 518/OD auto tranny - FAST EZ EFI - Edelbrock Fuel sump - HHR fan
    Hella H4 headlights on relays - 97 Dodge Avenger seats - Chin spoiler - Bumpers pulled in to ’72 offset

    Build: http://www.cuda-challenger.com/cc/index.php?topic=74674.0
    Pages: [1]
    « previous next »