1970-71 Challenger Parking/emergency brake assembly

[cdawg]

Hello,

I am in need of a Emergency brake assembly also know as the Parking Brake assembly. If any one has a spare laying around please PM. I have a early year 1971 Challenger built in. August 1970 so most parts fit from a 1970 challenger.

Thanks
Russ

[brotow]

Would a 74 challenger e brake work? I have a good one.

[Sleepychallenger]

which parts are you looking for? I have the pedal and first cable part, but thats it.

[cdawg]

I need the ebrake pedal assembly only. All my cables were replaced about a year ago. I broke off the release lever while doing some work on the steering column. I placed my big foot on the brake release lever and it broke off SMH. Anyway if you have one Show me a picture and PM how much you are asking for it and we can arrange shipping.

Thanks

[cdawg]

Brotow

I believe 73-74 are different  from the earlier years.

Thanks

[brotow]

As soon as  I get a chance I see if 1970 and 1974 are different.  I have my 1970 convert still apart and a 1974 parts car.  Both e brakes were media blasted and powder coated.

[shatar4]

I have one that came off my 71 Challenger that was built in Dec. of 70. Lever and pedal all move excellent.

[rUNCHARGER]

70 are different than 71 in my experience. I don't know if there might be a date cutoff though. You have to make sure that the way the cable mounts is what you need.

Sheldon

[shatar4]

Is there a part number stamped somewhere. If so where?

[rUNCHARGER]

Underneath your car if your right e-brake wheel cable comes over to the drivers side that's a 70 setup. If the right e-brake wheel cable is short and only mounts to the right side framerail thats a 71 and up setup. Hope that makes sense. The intermediate cable on a 70 goes to the left side back of the car while the 71 intermediate cable makes a u shaped loop connecting the right and left sides at the back.
I don't know if there is a # stamped on the pedal setup or not, I have a 71 pedal in my storage container, If I have time tomorrow I'll grab it a get a few pictures and see if there's a #.

Sheldon

[cdawg]

Is there a part number stamped somewhere. If so where?

I just send you a PM .

Thanks

[shatar4]

Reply sent