Author Topic: Boxed Cuda Lower control arms with sway bar tabs (Read 1994 times)

70B5Cuda · « **on:** March 04, 2014 - 02:09:35 PM »

Lower control arms from my 383 1970 Barracuda. They have factory sway bar tabs. I had them blasted and had boxing plates welded on and the welds smoothed. If the car were on the ground, it would be hard to tell they were modified, but they are obviously much stronger. They have been in my garage in bare metal for a couple years. I went with the RMS front end. $350 OBO plus shipping
The control arms will need some light prep work to clean up the metal before they are painted/powder coated.

70B5Cuda · « **Reply #1 on:** March 14, 2014 - 11:42:50 AM »

70B5Cuda · « **Reply #2 on:** March 20, 2014 - 09:12:08 AM »

Price drop. Let's get these gone.

70B5Cuda · « **Reply #3 on:** March 27, 2014 - 11:56:34 PM »

ph23vo · « **Reply #4 on:** April 01, 2014 - 03:16:38 PM »

would do 150.00 shipped on them to 98055 thanks

boydsdodge · « **Reply #5 on:** May 09, 2014 - 02:57:00 PM »

Have you sold your Control arms?

70B5Cuda · « **Reply #6 on:** October 13, 2014 - 09:55:42 AM »

Sorry for not updating......I sold these on eBay.....

Author Topic: Boxed Cuda Lower control arms with sway bar tabs (Read 1994 times)

70B5Cuda

Boxed Cuda Lower control arms with sway bar tabs

70B5Cuda

Re: Boxed Cuda Lower control arms with sway bar tabs

70B5Cuda

Re: Boxed Cuda Lower control arms with sway bar tabs

70B5Cuda

Re: Boxed Cuda Lower control arms with sway bar tabs

ph23vo

Re: Boxed Cuda Lower control arms with sway bar tabs

boydsdodge

Re: Boxed Cuda Lower control arms with sway bar tabs

70B5Cuda

Re: Boxed Cuda Lower control arms with sway bar tabs