Author Topic: New release from holly, new gen hemi controllers  (Read 1480 times)

Offline grimmey71

  • Full Member
  • ***
  • Posts: 733
New release from holly, new gen hemi controllers
« on: January 30, 2015 - 07:06:11 PM »




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: New release from holly, new gen hemi controllers
« Reply #1 on: January 30, 2015 - 10:15:00 PM »
Nice  :2thumbs:

Challenger - You`ll wish You Hadn`t

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: New release from holly, new gen hemi controllers
« Reply #2 on: January 30, 2015 - 10:52:05 PM »
Very nice!

I want to put a late model Hemi in a d-100, and this will make it a lot easier.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline Denison636

  • Jr. Member
  • **
  • Posts: 352
Re: New release from holly, new gen hemi controllers
« Reply #3 on: January 30, 2015 - 11:06:54 PM »
Why is it the more I read about these motors the more they scare me. I got some buddy's who supercharged there's and one found out that don't let the tuners put much timing in them. One blew is motor at 30 degrees. Had a bad detonation. After reviewing all charts and everything the motor was not lean. Was a little rich and also and spark knocks. They told me things looked killer and was only running 12lbs of boost to. Motor was still making power on the pull and out of nowhere it let go. I been doing a lot of reading on these motors and stayed away until things get figured out. Besides nothing sounds as good as an old motor like my 340 I have a video on here of.
This is just me and my input. I am a nobody tho that only had his L2 in ASE.
Its just a little 340 with a miss