News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: ignition coil fitment  (Read 3396 times)

    Offline multiflu

    • Jr. Member
    • **
    • Posts: 20
    ignition coil fitment
    « on: January 10, 2015 - 05:14:45 PM »
    Hello
     its my first Mopar and engine build
     now its time to instal ignition
     I have a Proform Electronic Ignition Distributor Kit never used and accel wires
     I think I need a ignition coil!
     question: a friend of my have for sale msd blaster 8223(and hi says "all coils are the same, it will fit")???

    and what is "Ballast resistor" do i need msd one or??

    thanks
    Logged
    monster
    off
    performance
    and
    road


    Offline DocMel

    • Full Member
    • ***
    • Posts: 828
    Re: ignition coil fitment
    « Reply #1 on: January 10, 2015 - 05:50:44 PM »
    Im using the MSG distro and blaster coil.   Can the resistor   You dont need it (At least if you are running a msd box, check your instructions)


    I mounted my coil on the inner fender well, near the horn.   I wouldnt put it laying on its side on top of the intake manifold.  Just too much heat
    Logged

    Offline multiflu

    • Jr. Member
    • **
    • Posts: 20
    Re: ignition coil fitment
    « Reply #2 on: January 11, 2015 - 08:04:07 AM »
    I don't have an MSD box. I have distro, thing called ignition modul, wires.

    I thought that I need only coil ?
    Or I need MSD box?

    Logged
    monster
    off
    performance
    and
    road

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: ignition coil fitment
    « Reply #3 on: January 11, 2015 - 08:38:46 AM »
    Doc just meant you don't need a ballast resistor if you are using an MSD.
    You don't HAVE to use an MSD box. What kind of ignition module do you have?
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline multiflu

    • Jr. Member
    • **
    • Posts: 20
    Re: ignition coil fitment
    « Reply #4 on: January 11, 2015 - 04:59:00 PM »
    I dont have fotos, but it 1 to 1 like this from web. (ps - that all i got)
    I would be grateful for advice  :worshippy
    Logged
    monster
    off
    performance
    and
    road

    Offline multiflu

    • Jr. Member
    • **
    • Posts: 20
    Re: ignition coil fitment
    « Reply #5 on: January 11, 2015 - 05:00:02 PM »
     except  ballast resistor on the pic!!!
    Logged
    monster
    off
    performance
    and
    road

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: ignition coil fitment
    « Reply #6 on: January 11, 2015 - 07:15:54 PM »
    With that ECU you need the ballast resistor.
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline blown motor

    • Resident
    • *****
    • Posts: 3013
    Re: ignition coil fitment
    « Reply #7 on: January 11, 2015 - 08:55:48 PM »
    Your ECU module is 4 pin and your wiring is 5 pin. I hope somebody more knowledgeable than me will comment on this. I think it's OK but I'm not sure.
    Logged
    In search of the eternal buzz!

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: ignition coil fitment
    « Reply #8 on: January 11, 2015 - 10:31:31 PM »
    Quote from: blown motor on January 11, 2015 - 08:55:48 PM
    Your ECU module is 4 pin and your wiring is 5 pin. I hope somebody more knowledgeable than me will comment on this. I think it's OK but I'm not sure.
    It's OK. The fifth wire is for a dual ballast resistor. It's fine to be left not connected to anything.
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline blown motor

    • Resident
    • *****
    • Posts: 3013
    Re: ignition coil fitment
    « Reply #9 on: January 11, 2015 - 10:59:50 PM »
    I knew there was an easy explaination for it but it wouldn't come to mind. Thanks Scott.
    Logged
    In search of the eternal buzz!

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: ignition coil fitment
    « Reply #10 on: January 12, 2015 - 12:13:27 AM »
    Got everything you need but a coil. Do you have a coil bracket?
    I chose a stock style Accel coil for electronic ignition
    http://www.jegs.com/i/Accel/110/8145C/10002/-1
    cheep bracket
    http://www.jegs.com/i/JEGS-Performance-Products/555/40190/10002/-1?parentProductId=1195871

    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline multiflu

    • Jr. Member
    • **
    • Posts: 20
    Re: ignition coil fitment
    « Reply #11 on: January 12, 2015 - 05:36:02 AM »
    wow!! thanks every one ;D

    this was my main question - "a friend of my have for sale msd blaster 3 p/n.8223(and hi says "all coils are the same, it will fit dont worry")???"

    when I go to the msd website - it offers only blaster 2 p/n.8202, but meny year ago I replace a broken msd with Mallory coil on my old car and it work, no problem!

    will MSD blaster 3 work as Bullitt say - take Accel???
    Logged
    monster
    off
    performance
    and
    road

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: ignition coil fitment
    « Reply #12 on: January 12, 2015 - 07:16:04 AM »
    Quote from: multiflu on January 12, 2015 - 05:36:02 AM
    wow!! thanks every one ;D

    this was my main question - "a friend of my have for sale msd blaster 3 p/n.8223(and hi says "all coils are the same, it will fit dont worry")???"

    when I go to the msd website - it offers only blaster 2 p/n.8202, but meny year ago I replace a broken msd with Mallory coil on my old car and it work, no problem!

    will MSD blaster 3 work as Bullitt say - take Accel???

    Missed your original question....yes   msd blaster 3 p/n.8223   will work

    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: ignition coil fitment
    « Reply #13 on: January 12, 2015 - 08:27:56 AM »
    If it is being mounted horizontally you need the MSD Vibration coil or it will leak
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline multiflu

    • Jr. Member
    • **
    • Posts: 20
    Re: ignition coil fitment
    « Reply #14 on: January 13, 2015 - 07:32:54 AM »
    Quote from: Chryco Psycho on January 12, 2015 - 08:27:56 AM
    If it is being mounted horizontally you need the MSD Vibration coil or it will leak


    yap, i know this problem!
    bad experience  :working:

    guy sold his MSD before I came ((
    So i think to go as  Bullitt- said with
    http://www.jegs.com/i/Accel/110/8145C/10002/-1
    Logged
    monster
    off
    performance
    and
    road
    Pages: [1]
    « previous next »