70 slap stick shifter chrome shaft below handle knob

[Code3]

Hello everyone,
I need the round chrome shaft cover that goes below the slap stick shifter knob and goes through the black plastic plate. I'm putting a pistol grip shifter on and the assembly I bought did not come with it.

Does it just slide on? and are all the slapstick shifter rectangular under the chrome?

[hemiken]

Can you post up a picture of what you bought please.
Sounds like you may have a handle that is specific to fit on to a 1970  Slap-Stick mechanism. This is a unique shifter and does not have any way of the round shaft being removed, it is all an integral part of the shifter itself. The other style of Slap-Stick mechanism has an oblong shaft, sort of like a flat piece of steal but with round ends on the front and rear edges of the main shaft, this style takes what is more commonly known as a T-handle. 1970 and 1974 used the round ball style mechanism, and 1971-1972-1973 and some of 1974 used the T-handle style mechanism.

[Code3]

It looks like I may have the t-handle type shifter and a round type bezel.

[Code3]

I was hoping to use this handle on there but it doesn't look like it will work now.

[hemiken]

Yes, you have the wrong slap-stick mechanism for what you want to do. 

[Moparparts]

Those rods in the pic are not e-body rods not sure how they would work

[Code3]

Those rods in the pic are not e-body rods not sure how they would work

They aren't? Will any of that stuff work for a 70 Challenger?   

[Code3]

Any idea what these linkages go to?