To straighten a bent PS pulley or Not

[FCC]

I removed the power steering pulley but bent it up   It's not too bad but it's still bent.  Does anyone know how or where I can go to straighten it?  Or would I be better off trying to locate a good OEM one?  Thanks.

[dakota]

I am hard pressed to imagine you will ever be able to get it straightened enough to avoid runout and some amount of vibration.   I'd go find a replacement if it were me.  That said, one of the mechanical wizards here may have a way to do it.

[OUTLAW]

     you might get it close but you will never get it right

[mopar jack]

I bought one off e-bay and off course it was bent and would wobble. I was able to straighten it by putting it on a tappered pin bar and using a rubber mallet to remove the run out. They are easy to bend.

[HP_Cuda]

Save yourself the time and buy a straight one.

 

[dodj]

I am hard pressed to imagine you will ever be able to get it straightened enough to avoid runout and some amount of vibration.   I'd go find a replacement if it were me. 

[FCC]

Thanks all!  I was able to find a straight used one.