Rear brake line tubing size

[GCC]

Looking to confirm the rear main brake line tubing outside diameter is 3/16".  For the main long line from the prop valve to the rear axle, and the two lines on the axle itself.  I believe they were all 3/16", is that correct?  This is on a 1970 Barracuda w/ 8-3/4 axle.

[Chryco Psycho]

Yes 

[anlauto]

All brake lines on all Chrysler cars are the same 3/16 size

[GCC]

Thanks guys; the brake line clip set I received from Inline Tube has clips that are way too large for 3/16" line.  I thought maybe the long main line is 1/4" (which I don't have anymore), but I do have a few old clips which do fit the new line, so I needed to know before returning this stuff.  Thanks! 

[jhaag]

original lines going to the rear would have had a shield on them. The od would be larger than 3/16, hence the clips are going to be larger. 

[IB-Cuda]

Sounds like you have fuel line clips 3/8"...?

[GCC]

Yes it does.  They look to be 5/16", depending on how you measure them.  Inline Tube said they will exchange them.  They are definitely too large for 3/16" line.  I have some of the original clips and those originals fit the new tubing like they should (without the shield).