News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: K-Member Pic Wanted  (Read 786 times)

    Offline daveh

    • Full Member
    • ***
    • Posts: 813
    K-Member Pic Wanted
    « on: May 28, 2015 - 01:52:01 PM »
    Hey Guys,

    I thought I saved it but I can't find it.  There was a post with pics that showed the right places to weld the K-member up in order to stiffen it up.  Does anyone have those pics?  Thanks

    Dave
    Logged


    Offline dakota

    • Full Member
    • ***
    • Posts: 585
    Re: K-Member Pic Wanted
    « Reply #1 on: May 28, 2015 - 04:48:09 PM »
    There are some pics on the firmfeel.com website (got to E body, then "reinforced k member".   These pics shows there stiffening plates installed.   I did mine welding the perimeter of the 2 main plates that are otherwise just spot welded.  Whether you buy their kit or make your own pieces I think the other biggest bang changes focus on boxing in the mounting location for the steering gear.  There were some gaps around the mounting location for the idler arm too.  Unless you go hog wild heating up one location too much, everything I've read says the k members are perry stout.   Good luck. 
    Logged

    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: K-Member Pic Wanted
    « Reply #2 on: May 29, 2015 - 02:09:10 PM »
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000

    Offline soundcontrol

    • Sr. Member
    • ****
    • Posts: 1603
    Re: K-Member Pic Wanted
    « Reply #3 on: May 29, 2015 - 04:06:07 PM »
    I just welded mine, there is some picts in my resto thread. (link below). I got the FF kit, but I think you can make an even better fit making your own pieces, maybe all K-frames are not exactly alike.
    Logged
    / Ken
    Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=102525.0
    topic=108917.new#new
    Pages: [1]
    « previous next »