News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: brake hose  (Read 533 times)

    Offline burdar

    • Sr. Resident
    • ******
    • Posts: 5925
    brake hose
    « on: May 08, 2015 - 11:11:52 AM »
    I just want to confirm that there is supposed to be a copper washer between the brake hose and the caliper.  My hoses are the style that screw right into the caliper...there is NO banjo bolt.  My ps hose is leaking.  I tightened up the hose but it just doesn't want to seal.  I found this while researching.  Is this the correct washer for my style of brake hose or does it take something else?
    Logged


    Offline Rich G

    • Jr. Member
    • **
    • Posts: 355
    Re: brake hose
    « Reply #1 on: May 09, 2015 - 02:38:56 PM »
    If you have a hose with a threaded end and a seat in the caliper then there is no washer. If there is no seat(like in the rear wheel cylinders) just a hole,  then you need a copper washer.
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: brake hose
    « Reply #2 on: May 09, 2015 - 08:20:51 PM »
    it is a flare seal as I recall where the hose meets the caliper machining
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »