Author Topic: Good place to T in brake booster? (Read 870 times)

JKcuda · « **on:** July 05, 2015 - 11:18:59 AM »

Hey guys,

Finishing up my right stuff 4 wheel power disc swap and have a quick question. Are there any places that are preferred to T in the line for the brake booster? I'm coming from 4 wheel manual drum so there's no spot on my car from the factory. Just wondering if there is that golden spot that everyone uses or if any vacuum source is fine.

Thanks...

72rtchallenger · « **Reply #1 on:** July 05, 2015 - 06:55:16 PM »

intake port

JKcuda · « **Reply #2 on:** July 05, 2015 - 07:12:36 PM »

Thanks!

Chryco Psycho · « **Reply #3 on:** July 05, 2015 - 10:02:34 PM »

dont tee anything into the booster , just connect the booster to the intake , usually there is a port on #8 runner

JKcuda · « **Reply #4 on:** July 06, 2015 - 07:00:10 AM »

Quote from: Chryco Psycho on July 05, 2015 - 10:02:34 PM

dont tee anything into the booster , just connect the booster to the intake , usually there is a port on #8 runner

OK. I'll check it out tonight. Thanks!

Sent from my Nexus 5

72rtchallenger · « **Reply #5 on:** July 06, 2015 - 06:33:20 PM »

very true keep the booster vacuum by its self , the port cp mentions should just have a screw in plug that you remove around #8 since yours didnt have a booster before its capped off and then screw in a single port to run to the booster

Author Topic: Good place to T in brake booster? (Read 870 times)

JKcuda

Good place to T in brake booster?

72rtchallenger

Re: Good place to T in brake booster?

JKcuda

Re: Good place to T in brake booster?

Chryco Psycho

Re: Good place to T in brake booster?

JKcuda

Re: Good place to T in brake booster?

72rtchallenger

Re: Good place to T in brake booster?