Do I have the proper transmission crossmember for my 1970 Challenger??

[750-h2]

Car is out of town at the body shop so I cannot measure. Found this cross member in my parts and want to detail it but I am not sure it is the correct one. There is one on Ebay right now that the seller claims is for a 70/71 E body, while it looks the same as mine the spacing between the mounting bolt holes is different.

Here are the measurements of mine.
-overall length 19 1/4"
-center to center of outer mounting holes 18"
-center to center of inner mounting holes 8 1/2"

I have also included some pictures. Any help would be greatly appreciated!

[anlauto]

Yours looks correct....If the holes are wider looking then the one on EBay, then yours is correct and he's wrong on his description

[750-h2]

Thanks Al, but just to be 100% sure any chance that you can measure Brian Dougon's old one for me?

[anlauto]

Okay, I measured Brian's and it measures the same as yours, 8 1/2" and 18"

[750-h2]

Perfect! Thanks again for the help.