Author Topic: Dash Hardware  (Read 719 times)

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Dash Hardware
« on: November 02, 2015 - 05:35:04 PM »
All,
I was reassembling my dash and I came across these two brackets. Can anyone tell me what they are for and where they go? :clueless:
challenger_73




Offline 72rtchallenger

  • Sr. Member
  • ****
  • Posts: 1734
  • 72 to 70 clone
    • cardomain
Re: Dash Hardware
« Reply #1 on: November 02, 2015 - 07:29:59 PM »
The bottom picture if its original may be the radio support in the back of dash,, thats just guess as mine was similar ,,the first picture with the curve looks like it may go to the lower part of the steering column but also just a guess
« Last Edit: November 02, 2015 - 07:41:26 PM by 72rtchallenger »
72rtchallenger
my challengers restro at http://www.cardomain.com/ride/399010
what happens in the garage
stays in the garage

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Re: Dash Hardware
« Reply #2 on: November 12, 2015 - 10:27:20 AM »
I stumbled onto what the second picture is. It is the map light dash ground strap. I do not have a map light on my cat. Where is it mounted/located?

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: Dash Hardware
« Reply #3 on: November 12, 2015 - 12:14:02 PM »
that bottom picture looks very close to one of the wire harness retention straps (holds the wiring harness up/out of the way).
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)