Author Topic: Electric Fan Install  (Read 3627 times)

Offline cudabob496

  • Sr. Resident
  • ******
  • Posts: 8024
Re: Electric Fan Install
« Reply #15 on: December 05, 2015 - 09:11:58 PM »
the fan motor is only pulling 11.5 amps, so that can't be the problem
72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

2011 Kawasaki Z1000




Offline cudabob496

  • Sr. Resident
  • ******
  • Posts: 8024
Re: Electric Fan Install
« Reply #16 on: December 05, 2015 - 09:16:44 PM »
have you powered the fan off the batter yet? might solve this whole problem

see articla below. It has two pages.

http://www.madelectrical.com/electricaltech/amp-gauges.shtml
72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

2011 Kawasaki Z1000