Author Topic: 3 way splitter/barrel connector?  (Read 843 times)

Offline msbaugh

  • Sr. Member
  • ****
  • Posts: 1148
3 way splitter/barrel connector?
« on: January 27, 2016 - 02:40:03 PM »
Does anyone know where to buy one of these things?  They were in the original harness and I'd like to splice one into my dash lights to run the small LEDS to my radio and aftermarket gauges so that they come on and dim with the switch.
« Last Edit: January 27, 2016 - 02:42:02 PM by msbaugh »




Offline shawge

  • Full Member
  • ***
  • Posts: 571
  • Zoiks!!
Re: 3 way splitter/barrel connector?
« Reply #1 on: January 27, 2016 - 04:09:24 PM »
They must be out there since these are in the reproduction harnesses - not sure where.  I have seem them in the junk yards when wiring was present in the older cars.  You could make your own - make a 1 male bullet to X female bullets (or another connector) harness.
- Jerry

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Re: 3 way splitter/barrel connector?
« Reply #2 on: February 03, 2016 - 11:33:04 AM »
I believe that the correct connection is orange for the dash lights. The yellow is for accessories.
challenger_73

Offline Grec

  • The '73 Chrysler should have made...
  • Full Member
  • ***
  • Posts: 974
Re: 3 way splitter/barrel connector?
« Reply #3 on: February 03, 2016 - 02:19:01 PM »
Maybe try evanswiring.com

He sells parts as well as full harnesses.
1973 Challenger Rallye
- 440 Six Pack
- A833 4 Speed, 18 Spline
- FE5 Rallye Red on Black