Author Topic: Goodyear polyglas E60 tires  (Read 3423 times)

Offline culp71

  • Full Member
  • ***
  • Posts: 683
Goodyear polyglas E60 tires
« on: March 16, 2016 - 08:23:34 AM »
any one have these tires on a 8 inch width wheel?
GYE6015 - E60/15 Goodyear 2/2 Polyglas GT Tire With Raised White Letter
I find two different places that say a 7-8 inch width wheel can be used, the rest say 7 only...

thanks




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Goodyear polyglas E60 tires
« Reply #1 on: March 16, 2016 - 08:39:40 PM »
you have a lot of sidewall to flex & if the rim & tread width are close to the same you will be ok

Challenger - You`ll wish You Hadn`t

Offline AARuFAST

  • AARuFAST
  • Resident
  • *****
  • Posts: 2154
Re: Goodyear polyglas E60 tires
« Reply #2 on: March 16, 2016 - 09:09:42 PM »
not much flex on polyglas maybe radials.
have them on our AAR
1970 AAR Cuda
1970 Gran Coupe Ragtop. 1 of 66
Gran Cpe Convertible 1 yr only.

" I Want to Ride "

" I tried to be normal once...
it was the most boring
2 minutes of my life!!!!"

Offline culp71

  • Full Member
  • ***
  • Posts: 683
Re: Goodyear polyglas E60 tires
« Reply #3 on: March 17, 2016 - 09:48:24 AM »
alright so later today I am going to order,

wheels from summit racing:
56 SERIES CHRYSLER RALLYE SILVER by WHEEL VINTIQUES 15x8
http://www.summitracing.com/parts/wvi-56-5812042

and tires from classic industries:
GYE6015-E60/15 GOODYEAR tires
http://www.classicindustries.com/product/camaro/parts/gye6015.html

unless anyone feels fitment of tire on wheel would be any issue?



Offline 1 Wild R/T

  • Resident
  • *****
  • Posts: 4594
Re: Goodyear polyglas E60 tires
« Reply #4 on: March 17, 2016 - 12:47:35 PM »
Why would you choose to run those tires which are obviously pointed to a stock resto but then choose to put them on a wheel thats wider than the factory produced? None of my business, it's your car to do as you please but Chrysler only used those tires on 15x7 rims so why stretch it? The modern equivalent tire size is  215/60-15, the tire manufacturers recommended rim width for a 215/60-15 is 6-7.5 and as mentioned before modern radials are more forgiving than Bias ply tires...

If your looking at wider wheels that tells me your not truly committed to the OE look.. If thats the case than wise up right now & forget the idea of paying twice as much for an inferior bias ply tire just so it'll have a certain "look"...... :2cents:

Buy the wider wheels, buy some decent modern tires, smoke'em & replace'em, have better ride, better cornering, more traction & still have money in your pocket...

Or really go off the deep end, order a set of Year One's 17" Rallies & some real performance tires & never look back...
JS27N0B 70 Challenger R/T Convertible  FJ5 Sublime, Show Poodle w/90,000 miles since resto
WS27L8G 68 Coronet R/T Convertible  PP1 Bright Red, Project
RM21H9E 69 Road Runner Coupe R4 Performance Red, Sold...
5H21C  65 Falcon 2 dr Wagon... Dog Hauler...

Offline culp71

  • Full Member
  • ***
  • Posts: 683
Re: Goodyear polyglas E60 tires
« Reply #5 on: March 18, 2016 - 01:21:47 PM »
I see what your saying.....

I guess my main thought was the 15 by 7 rims have a back spacing of 4.25
but had been told the original had a 4.5 back spacing.
the wheels I found with that back spacing was the 15 by 8 rims.

additionally, I'm not a huge fan of the side wall bulged, and I know a rim
and tire with similar width/ tread will help would minimize this.

I also love the look of the correct original goodyear polyglas lettering,
and at this point a few more hundred dollars more for a multiple
thousand dollar restoration doesn't really sway me away from using them.


« Last Edit: March 18, 2016 - 01:43:06 PM by culp71 »

Offline YellowThumper

  • Sr. Member
  • ****
  • Posts: 1633
  • I left the snow for this?
Re: Goodyear polyglas E60 tires
« Reply #6 on: March 18, 2016 - 02:13:28 PM »
Here is a couple of shots of mine. Custom rims are 8-1/2 wide with 4-3/4 bs. Tire is 275/60/15. It looks closer in pic to leaf springs than it really is. Bit wider than the e60 more rim and more bs including more sidewall flex because of the radial. No rubbing anywhere. Car is all original pieces. IMOP either wheel choice will work and fit with your tire choice. It just comes down to your visual preference.

Now as for bias ply over radials. I have driven with both and would never go back to bias. Safety, handling, traction, ride, etc... no comparison.  All period correct show piece sure. Other than that nope. Again MHOP.

MIKE.



« Last Edit: March 21, 2016 - 02:09:06 PM by YellowThumper »
Removing the warning labels one at a time.
Nature will take care of the rest.

Offline AARuFAST

  • AARuFAST
  • Resident
  • *****
  • Posts: 2154
Re: Goodyear polyglas E60 tires
« Reply #7 on: March 18, 2016 - 10:27:21 PM »
Bias on our AAR l@@K good sitting still but SUCK when driving on them.
As mentioned poor handling.  Ruts in road toss it around........Maybe power steering would help.......
1970 AAR Cuda
1970 Gran Coupe Ragtop. 1 of 66
Gran Cpe Convertible 1 yr only.

" I Want to Ride "

" I tried to be normal once...
it was the most boring
2 minutes of my life!!!!"

Offline culp71

  • Full Member
  • ***
  • Posts: 683
Re: Goodyear polyglas E60 tires
« Reply #8 on: March 21, 2016 - 01:45:25 PM »
so,
I check with about 20 tire shops,
but none could tell me if these tires
would fit on a 8 inch rim, so I contacted
Goodyear directly and am awaiting a answer...

Offline YellowThumper

  • Sr. Member
  • ****
  • Posts: 1633
  • I left the snow for this?
Re: Goodyear polyglas E60 tires
« Reply #9 on: March 21, 2016 - 02:07:16 PM »
I found this for ya.
Removing the warning labels one at a time.
Nature will take care of the rest.

Offline EB3-GranCoupe

  • Sr. Member
  • ****
  • Posts: 1435
  • BP23 U0B
Re: Goodyear polyglas E60 tires
« Reply #10 on: March 21, 2016 - 08:06:58 PM »
I am considering the Mickey Thompson Sportsman S/R for my next set of tires:
http://www.mickeythompsontires.com/street.php?item=SportsmanSR

They appear to come close to the square corner that you get on a bias-ply tire.  But with radials, you will never get it exact, there is always a rounding to it, no matter who makes the tire.

26x10.00R15LT should fit nicely on a 15x8 rim.
26x8.00R15LT for a 15x7 rim.

Offline dfrazz

  • 1970 Cuda - 1968 Charger
  • Resident
  • *****
  • Posts: 4070
Re: Goodyear polyglas E60 tires
« Reply #11 on: March 21, 2016 - 08:44:39 PM »
I am considering the Mickey Thompson Sportsman S/R for my next set of tires:
http://www.mickeythompsontires.com/street.php?item=SportsmanSR



Just ordered these for my '68 Charger!   :2thumbs:

Offline culp71

  • Full Member
  • ***
  • Posts: 683
Re: Goodyear polyglas E60 tires
« Reply #12 on: March 22, 2016 - 01:13:02 PM »
so,
Goodyear just got back to me and had no information, they actually referred back to the tires shops that I already contacted that suggested to contact Goodyear as they didn't know...... so looks like I will just order 15 7's and hope it all works out. so frustrating when people will sell you items that they have no idea what they actually are.