Schematic amp meter bypass with battery disconnect

[Cudakiller70]

 Does anyone know or have of a schematic they could share that incorporates both mad electric amp meter bypass and a battery/Alternator disconnect?

[67vertman]

Here is a website that has the amp meter bypass? 

http://www.madelectrical.com/electricaltech/amp-gauges.shtml

[Cudakiller70]

Here is a website that has the amp meter bypass? 

http://www.madelectrical.com/electricaltech/amp-gauges.shtml

Thanks vertman. I do have that, but again Thanks. I installed a battery/alternator cutoff switch after doing the amp meter bypass and regardless of switch positions (it's a good switch I did check it) was still getting power to the harness. After looking at an engine bay schematic realized the small wire from the positive battery terminal clamp that went to the starter relay was hooked up. So I cut it off at the battery terminal clamp and ran it to the battery/alternator switch.
I was having a problem figuring it out. Think I got it. We shall see.