Author Topic: cuda drive shaft lenght (Read 1144 times)

culp71 · « **on:** April 15, 2016 - 01:26:58 PM »

question,
I have a drive shaft from a challenger, the yoke and spline shaft match my 727 trans and 8 3/4 rear end. but the length is wrong,

what should be the proper length for a 1971 340 cuda /727/ 8 3/4 drive shaft?

Katfish · « **Reply #1 on:** April 15, 2016 - 02:27:41 PM »

http://board.moparts.org/ubbthreads/upload2/4563759-PartNoDriveshafts.pdf

anlauto · « **Reply #2 on:** April 15, 2016 - 03:10:40 PM »

two inches shorter

Racer57 · « **Reply #3 on:** April 15, 2016 - 10:00:15 PM »

How do you determine the proper length if using a Tremec or any other tranny besides factory ?

culp71 · « **Reply #4 on:** August 30, 2016 - 03:53:04 PM »

alright so after finding multiple "correct" lengths for a cuda w 340/ 727 and a 8 3/4
anywhere from 43.60 up to 43.85
I have decided to have it shortened to
43 5/8 as this would be 43.625
unless any one would recommend differently?

73_Cuda_4_Me · « **Reply #5 on:** August 30, 2016 - 04:58:49 PM »

That listing does not include a 73 340 with an 8 3/4 Cuda...

Author Topic: cuda drive shaft lenght (Read 1144 times)

culp71

cuda drive shaft lenght

Katfish

Re: cuda drive shaft lenght

anlauto

Re: cuda drive shaft lenght

Racer57

Re: cuda drive shaft lenght

culp71

Re: cuda drive shaft lenght

73_Cuda_4_Me

Re: cuda drive shaft lenght