I have a request from you guys out there.Havent worked on the Cuda in about a year or so due to new house,2 new kids ect.Im kinda lost on where to start,as I left off with installing the suspension but otherwise it's a painted shell.Im going to start with putting the regulators and glass back in the doors.The problem is the body shop pulled all the regulators and poured the screws and bolts into a can.I have the factory service manual,but it doesn't show what fasteners go where.I was hoping somebody had a close up pic of inside of the door with the panel off and fasteners installed so that I could dig through the cans,and hopefully using the pics of the fastener heads can figure out what goes where,where a screw goes as opposed to a bolt ect.Thanks for any help.Id really like my car running in the next year or so lol.