Author Topic: 340 heads rebuild or replace?  (Read 4474 times)

Offline Cudakiller70

  • Sr. Member
  • ****
  • Posts: 1765
Re: 340 heads rebuild or replace?
« Reply #15 on: September 24, 2016 - 11:37:33 PM »
immediately following this...

 :roflsmiley: :roflsmiley: :roflsmiley:  BTDT I feel your wallets pain....
I'm fitting off, right now the thoughts of a stroker or 440, seriously I don't need to spend any more money on this car.
Auto spell I'm tired of your shirt
The above is just my opinion
Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
John Adams




Offline 1 Wild R/T

  • Resident
  • *****
  • Posts: 4594
Re: 340 heads rebuild or replace?
« Reply #16 on: September 25, 2016 - 12:26:21 AM »
I collected parts for a couple years planning to freshen my current Challenger, pulled the engine January 2nd & do to a few issues with project creep got it fired up & running a couple weeks before Spring Fling... A point & a half more compression, a little more cam, a little more convertor... Definitely a lot stronger but the carb needs tweaking & while I've dialed in plenty of carbs through the years I no longer feel like playing with gasoline on top of a hot engine so every time I made a change & went to drive it to see how it ran I would let it cool off before making anymore changes..... I got it better but fighting the starting issues of a carb with the current "fuel" has really gotten old....  In the end I wound up picking up a FiTech system & a Tanks Inc fuel tank.... Now I just need to find the time to put it all together & dial it in....

I too looked at a stroker but honestly I'm looking for a cruiser not a race car.. It runs well enough to put a smile on my face & thats all I really need... Well that & having it start at the touch of the key like they use to do.... Which I think the FiTech will do for me...

Good Luck with what ever you decide...

JS27N0B 70 Challenger R/T Convertible  FJ5 Sublime, Show Poodle w/90,000 miles since resto
WS27L8G 68 Coronet R/T Convertible  PP1 Bright Red, Project
RM21H9E 69 Road Runner Coupe R4 Performance Red, Sold...
5H21C  65 Falcon 2 dr Wagon... Dog Hauler...

Offline Cudakiller70

  • Sr. Member
  • ****
  • Posts: 1765
Re: 340 heads rebuild or replace?
« Reply #17 on: September 26, 2016 - 12:36:39 AM »
Ok this isn't right someone in the family sent this, Chevy guy messing with me. :grinyes:
http://sfbay.craigslist.org/sby/pts/5784779772.html
Auto spell I'm tired of your shirt
The above is just my opinion
Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
John Adams

Offline 734406pk

  • Andy
  • Sr. Member
  • ****
  • Posts: 1716
Re: 340 heads rebuild or replace?
« Reply #18 on: September 27, 2016 - 10:40:09 PM »
I'm fitting off, right now the thoughts of a stroker or 440, seriously I don't need to spend any more money on this car.

Well if your like me, if you are thinking it, it's not even an option at this point... It's happening, the question is when? :thinkerg:
1973 Challenger 440 6 pack auto 3.91 rear
2012 Dodge Ram 3500 dually 6.7 Cummins Fleece EFI Live
1973 Challenger 318 2bbl auto 2.73 rear 22.5 mpg RIP
1970 Challenger TA 340 4bbl auto-Sold and sad
1999 Dodge Ram 3500 dually 5.9 Cummins Fleece tuned VGT-sold
1995 Kawasaki ZX1100E & still alive

Offline Cudakiller70

  • Sr. Member
  • ****
  • Posts: 1765
Re: 340 heads rebuild or replace?
« Reply #19 on: September 27, 2016 - 11:58:41 PM »
Well if your like me, if you are thinking it, it's not even an option at this point... It's happening, the question is when? :thinkerg:
Well for once or twice in my life I'm trying to use a little willpower, I should have lots cause I haven't used much before. Here's the deal I'm waiting on some who's coming over to put an eye on the short block, if it's ok then I order a cam and it's going back together. If it looks like rebuild then it's a stroker.
Auto spell I'm tired of your shirt
The above is just my opinion
Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
John Adams

Offline 734406pk

  • Andy
  • Sr. Member
  • ****
  • Posts: 1716
Re: 340 heads rebuild or replace?
« Reply #20 on: September 28, 2016 - 12:09:09 AM »
Good luck with whatever you decide!!
1973 Challenger 440 6 pack auto 3.91 rear
2012 Dodge Ram 3500 dually 6.7 Cummins Fleece EFI Live
1973 Challenger 318 2bbl auto 2.73 rear 22.5 mpg RIP
1970 Challenger TA 340 4bbl auto-Sold and sad
1999 Dodge Ram 3500 dually 5.9 Cummins Fleece tuned VGT-sold
1995 Kawasaki ZX1100E & still alive

Offline Cudakiller70

  • Sr. Member
  • ****
  • Posts: 1765
Re: 340 heads rebuild or replace?
« Reply #21 on: September 29, 2016 - 12:07:53 PM »
Machine shop called all exhaust valves were bad and 1 intake valve also. No stroker it's going back together with new cam.
Auto spell I'm tired of your shirt
The above is just my opinion
Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
John Adams

Offline Cudakiller70

  • Sr. Member
  • ****
  • Posts: 1765
Re: 340 heads rebuild or replace?
« Reply #22 on: September 30, 2016 - 07:38:54 PM »
Morgans in Walnut creek is one of the last speed shops around and pricey. Try Quality cylinder head in Pacheco/Concord. I took a 440 906 head in for repair and he recognized what it was as soon as he saw it. Roberto is his name and he has been doing head repair at least  30 years. 925 685 9381
mopar jack I owe you a couple of cold ones :cheers: Just picked up my heads only $456 parts/labor. Roberto knew what he was looking at. All exhaust valves and 1 intake valve bad. HAPPY HAPPY HAPPY! :2thumbs: Thank you!
Auto spell I'm tired of your shirt
The above is just my opinion
Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
John Adams

Offline rUNCHARGER

  • Sr. Member
  • ****
  • Posts: 1169
Re: 340 heads rebuild or replace?
« Reply #23 on: September 30, 2016 - 07:47:34 PM »
That's fair.

Sheldon

Offline mopar jack

  • Full Member
  • ***
  • Posts: 566
Re: 340 heads rebuild or replace?
« Reply #24 on: October 01, 2016 - 11:50:55 AM »
Glad it worked out for you.

Offline Cudakiller70

  • Sr. Member
  • ****
  • Posts: 1765
Re: 340 heads rebuild or replace?
« Reply #25 on: October 01, 2016 - 12:56:11 PM »
Oh I forgot Roberto tells me just before leaving "I fixed your heads real good, now you can fly"  :2thumbs:
Auto spell I'm tired of your shirt
The above is just my opinion
Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
John Adams

Offline 734406pk

  • Andy
  • Sr. Member
  • ****
  • Posts: 1716
Re: 340 heads rebuild or replace?
« Reply #26 on: October 04, 2016 - 08:05:28 PM »
That was an awesome deal IMO! Good luck!
1973 Challenger 440 6 pack auto 3.91 rear
2012 Dodge Ram 3500 dually 6.7 Cummins Fleece EFI Live
1973 Challenger 318 2bbl auto 2.73 rear 22.5 mpg RIP
1970 Challenger TA 340 4bbl auto-Sold and sad
1999 Dodge Ram 3500 dually 5.9 Cummins Fleece tuned VGT-sold
1995 Kawasaki ZX1100E & still alive

Offline AU6pack

  • Jr. Member
  • **
  • Posts: 172
Re: 340 heads rebuild or replace?
« Reply #27 on: October 25, 2016 - 10:02:11 AM »
Love a happy ending  :cheers:
Craig
Melbourne, Australia
1970 Challenger 416 6 pak
Resto thread - http://www.cuda-challenger.com/cc/index.php?topic=114787.0