Author Topic: Steering  (Read 1087 times)

Offline Cuda_451

  • Jr. Member
  • **
  • Posts: 255
Steering
« on: November 01, 2016 - 04:13:27 PM »
When the steering wheel turns it makes a kind of hollow sound from around the Dash area? It's hard to explain the sound. Any ideas?
1970 Plymouth Barracuda
1995 Dodge RAM 1500 SLT
2006 Ford Mustang V6 Supercharged




Offline soundcontrol

  • Sr. Member
  • ****
  • Posts: 1603
Re: Steering
« Reply #1 on: November 01, 2016 - 04:27:08 PM »
One of my cars did that. I had a Grant steering wheel and somehow the steering wheel adapter cover scraped the steering colum when I turned it. I don't remember how I fixed it but that was what caused it for me.
/ Ken
Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=102525.0
topic=108917.new#new

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: Steering
« Reply #2 on: November 01, 2016 - 04:37:45 PM »
The upper bearing could also be dry.

Offline Cuda_451

  • Jr. Member
  • **
  • Posts: 255
Re: Steering
« Reply #3 on: November 01, 2016 - 09:20:33 PM »
All steering components are still factory ones so it could easily be both. How would I pull the seal out?
1970 Plymouth Barracuda
1995 Dodge RAM 1500 SLT
2006 Ford Mustang V6 Supercharged

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Steering
« Reply #4 on: November 01, 2016 - 09:47:07 PM »
is the shaft centered in the column looking at it from under the hood ?
 The retainer plate on the floor floats so it can be centered properly

Challenger - You`ll wish You Hadn`t

Offline Cuda_451

  • Jr. Member
  • **
  • Posts: 255
Re: Steering
« Reply #5 on: November 01, 2016 - 10:54:13 PM »
Yes it is, bug I can wiggle the whole steering wheel and all up and down from the drivers seat
1970 Plymouth Barracuda
1995 Dodge RAM 1500 SLT
2006 Ford Mustang V6 Supercharged

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Steering
« Reply #6 on: November 01, 2016 - 11:40:41 PM »
well I believe we have found the problem
 is the upper brg seated properly snap ring holding it in place on the shaft ?

Challenger - You`ll wish You Hadn`t

Offline CUDA JAS

  • Resident
  • *****
  • Posts: 2292
  • vroooooom!
Re: Steering
« Reply #7 on: November 04, 2016 - 09:58:24 AM »
If you are looking for step by step instructions on how to pull the column apart shoot me a PM with your email address and I can send you a PDF document that will help.


Jason 
74 'cuda 360/727



Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

Just call me a gearhead!