Crank Depth For TKO 600 With PICS

[daveh]

Hey Guys,

I finally have the engine off of the stand and on the K-member on the jig.  I am running a 1969 340 and wanted to make sure that the crank was the right depth.  I'm showing 2.571" to the farthest outer ring of the crank.  I do have the larger pilot bushing for the crank. Is my depth good?  Thanks

Dave

[Chryco Psycho]

My guess is that it looks like lots of depth but it is just a guess

[daveh]

I thought the same thing.  Thanks

[Rolling_Thunder]

you're good - the locating pilot tip on the tremec TKO series transmission is like an inch...     it does not protrude any further than the conversion needle pilot bearing

[daveh]

Thanks Rolling-Thunder.