Author Topic: 70 Cuda tail panel (Read 4568 times)

jbearden · « **on:** November 16, 2014 - 06:07:59 PM »

I'm sure that I know the answer to this but the AAR that I recently acquired has me confused.It appears that the "'cuda" tail panel emblem came on the drivers side of the car.Has anyone ever run into this?I have pics that can be posted later.

anlauto · « **Reply #1 on:** November 16, 2014 - 07:58:32 PM »

Your car is obviously not original, and it's a stick on emblem, so somebody obviously just stuck it on the wrong side after a repaint.

jbearden · « **Reply #2 on:** November 17, 2014 - 05:57:14 PM »

I thought so too,but while I was digging around in the trunk I noticed that the holes were drilled on the driver side and there is nothing on the passenger side.I have added these pics to photo bucket if you wouldn't mind taking a look.

http://s42.photobucket.com/user/jamesrbeardenii/library/Mobile%20Uploads

anlauto · « **Reply #3 on:** November 17, 2014 - 06:02:12 PM »

That would be for a dealership emblem....very common in the 70's, in fact...my AAR has them too.

jbearden · « **Reply #4 on:** November 17, 2014 - 06:31:32 PM »

Thank you for clearing that up.I was getting getting really confused.

3D · « **Reply #5 on:** February 13, 2015 - 06:55:15 PM »

This Should Help.

gf7cuda · « **Reply #6 on:** December 01, 2016 - 08:47:50 PM »

would you have a pick for 71 cuda tail panels emblems (2) measurements???

Author Topic: 70 Cuda tail panel (Read 4568 times)

jbearden

70 Cuda tail panel

anlauto

Re: 70 Cuda tail panel

jbearden

Re: 70 Cuda tail panel

anlauto

Re: 70 Cuda tail panel

jbearden

Re: 70 Cuda tail panel

3D

Re: 70 Cuda tail panel

gf7cuda

Re: 70 Cuda tail panel