Hello all,
I have just completed installing a Hotchkis TVS system in my '72 Cuda. The entire suspension had just been restored prior to my purchasing it so there is only about 300 miles on all the removed components at this point. I will add that everything I removed was working perfectly before it's removal. I feel sorta dumb removing perfectly working parts but I wanted to go Pro Touring.
All parts have new poly bushing installed or still in the bag new.
Here's what I have:
Front:
Upper Control arms
Disc Brakes-knuckles, disc, pads, dust shields,bearings, flex lines, hard lines etc.
complete sway bar-mounting brackets and everything to completely install
Torsion bars, clips, boots
Shocks (2)
Strut rods
Tie rod ends
Master cylinder
Booster with under dash linkage
proportioning valve with ss brake lines
stainless front brake lines
Rear:
Sway Bar assembly -complete
spring pack
shackles
Drum Brakes-completed with backing plates, drums and all internals
set of large axle studs (new in bag)
Shocks (4) two are new Bilsteins still in the boxes
Misc.
22"Radiator-new aftermarket with fan shroud
5 blade hard fan with spacer
Wheels:about 300 miles on them
2-Ridler 365 Chrome 17"x7"
2-Ridler 365 Chrome 17"x8"
Tires:
2-Falken FK452 234/45r17
2-Flaken FK452 255/45r17
I would like to sell everything as a package if I can. I can supply pictures for anyone interested.(I'll need to pull everything out of their boxes)
I also have quite a few misc. items that will be included with the deal at no additional cost.
Price for everything $2000
Price without wheel/tires $1500
Cheers!
Mickm
