Author Topic: Crank Sprocket (Read 782 times)

dodj · « **on:** April 09, 2017 - 07:35:17 AM »

Any tricks to removing them? Started a cam swap last night. Everything is off/out except for the crank sprocket.

xtopfuel · « **Reply #1 on:** April 09, 2017 - 08:40:50 AM »

the crank sprocket should just slide off, it may be stuck a little but best I recall its not a pressed fit as it would be to difficult to install chain

dodj · « **Reply #2 on:** April 09, 2017 - 11:10:39 AM »

Ya, I was sure it was a slide fit, but I can't get it off so I thought I'd ask. It's locked on there somehow.
I'll give it a few whacks and see how it goes.

xtopfuel · « **Reply #3 on:** April 09, 2017 - 11:24:14 AM »

Don't whack it if you have a 3 arm puller it should come easy

dodj · « **Reply #4 on:** April 09, 2017 - 11:32:26 AM »

Quote from: xtopfuel on April 09, 2017 - 11:24:14 AM

Don't whack it if you have a 3 arm puller it should come easy

Probably a better idea. lol

Author Topic: Crank Sprocket (Read 782 times)

dodj

Crank Sprocket

xtopfuel

Re: Crank Sprocket

dodj

Re: Crank Sprocket

xtopfuel

Re: Crank Sprocket

dodj

Re: Crank Sprocket