Author Topic: Demon specs leaked  (Read 3473 times)

Offline gyman98

  • Jr. Member
  • **
  • Posts: 183
Re: Demon specs leaked
« Reply #15 on: April 13, 2017 - 10:57:55 AM »
:rebel:
The letter from NHRA stated a car that goes under 10 seconds OR over 135mph in the quarter needs a cage.  If it was 11.99 every hellcat, viper, ZR1 Bette, and ZL1 camaro would need a cage, along with all the Ferraris and lamborghinis etc


1970 hemicuda convertible clone 426/727 3.23 8 3/4 suregrip




Offline jimynick

  • Resident
  • *****
  • Posts: 4512
Re: Demon specs leaked
« Reply #16 on: April 13, 2017 - 04:11:32 PM »
there seems to be an issue regarding the hard and fast NHRA rules and the times I quoted where the last ones I'd heard. Having said that, I checked and here's what I saw. "NHRA

ROLL CAGE
Roll cage mandatory in cars running 10.99 (*6.99) or quicker or any
car exceeding 135 mph. In full-bodied cars, with unaltered firewall,
floor, and body (from firewall rearward, wheeltubs permitted),
running between 10.00 (*6.40) and 10.99 (*6.99), roll bar permitted
in place of roll cage. In convertibles running 10.99 or quicker or
exceeding 135 mph, roll cage mandatory. Cars running between
7.50 (*4.50) and 9.99 (*6.39) must have chassis recertified every
three years by NHRA and have a serialized sticker affixed to cage
before participation. Plating of chassis prohibited for all cars
manufactured after Jan. 1, 2003. Rear-engine dragsters must
conform to SFI Spec 2.7B; vehicles running 8.49 (*5.35) to 7.50
(*4.50) and/or exceeding 180 mph must meet appropriate SFI Spec
for body used. Effective Jan. 1, 2007, all new Street Roadsters must
conform to SFI Spec 10.4. Existing Street Roadsters must meet SFI
Spec 10.4 at their next scheduled recertification effective Jan. 1,
2008. No existing cars will be recertified early to delay compliance.
All others must conform to specs for body style used, as listed in
General Regulations 4:11, 10:6.
Note the difference between roll bar and roll cage as well. Draw your own conclusions from there.

Offline gyman98

  • Jr. Member
  • **
  • Posts: 183
Re: Demon specs leaked
« Reply #17 on: April 14, 2017 - 01:03:26 PM »
I think you need to look at the 2008 and newer model oem rules
1970 hemicuda convertible clone 426/727 3.23 8 3/4 suregrip

Offline kissalien

  • Sr. Member
  • ****
  • Posts: 1170
Re: Demon specs leaked
« Reply #18 on: April 15, 2017 - 07:17:28 PM »