Exhaust Kit - 'Cuda Only - Recommendations other than TTI?

[GoodysGotaCuda]

I am in need of header-back exhaust and 'Cuda tips to exit the rear valance. I have not been able to find a kit online that is intended to exit through the valance, only turn downs.

Are there other options outside of TTI for a kit like this? $1,100 is quite steep and I have too much scar tissue to trust taking it to an exhaust shop.

[1 Wild R/T]

You'll probably get a good recommendation but on the exhaust shop side if you ask around to local hotrodders there is probably a good shop around... We have a number of hack shops but we have two local shops that do excellent custom work....

[Bullitt-]

Pypes has a 2.5" kit  http://pypesexhaust.com/i-12201050-70-74-mopar-e-body-2-5-w-valance-cutout-system-sme11s.html
I have the Challenger version. 


their tips are pricey http://pypesexhaust.com/i-12200784-70-74-cuda-rectangle-2-5-tips-evt87.html

[PLUM72]

You have alot of custom stuff going on with your car.  A standard TTI kit or kit from any manufacturer may not work without significant tweaks.  You might need to buy a mandrel bent pipe kit and weld it up yourself.  The other option is a combination of all the above.  Use TTI or Accurate Exhaust or what ever manufacturer for the back part, say tips back to mufflers then fabricate your own head pipes. 

[GoodysGotaCuda]

I bought a TTI setup. I have TTI headers and engine mounts, they confirmed that the t56 shouldn't be an issue. After that, it's all "factory" back there.


Sent from my iPhone using Tapatalk