Inspection Plate Cover

[DirksCuda]

I just finished putting my cluth in my 70 Cuda 340 and after I put the inspection plate cover on I see there are 2 bolts on the front of it,is there another cover that goes on there I can look up an see the ring gear on the paaenger side of the motor. What would it be called an were would I get one. The car was in pieces when I got it so I don't even know what I'm looking for . I pic would be great Thanks

[70chall440]

If there is hole in the shield you jut installed then yes, there is another plate, however on a manual (you did say you installed a clutch correct), I believe the cover should be all one piece. Contact Brewers

[DirksCuda]

Thanks 70 Chall I checked with brewers and there is a plate that goes on first the starter has to come back off. 39.95 for the plate Thanks Again 

[70chall440]

Yeah that is the dust shield; sorry I wasn't clearer but I wasn't really clear on what you already had.