Author Topic: sunvisor tip attachment (Read 946 times)

culp71 · « **on:** March 05, 2018 - 09:41:57 AM »

how do the tips for the sun visors attach? is there to be some type of stud on the end of the sun visor?

1 Wild R/T · « **Reply #1 on:** March 05, 2018 - 11:49:55 AM »

Should be a metal rod about 3.5" long, about 3/8" diameter with a stepped area machined into the end.... You should be able to source a pair from practically any vintage mopar, cars, trucks, vans....

culp71 · « **Reply #2 on:** March 05, 2018 - 12:41:23 PM »

awesome, found a set on ebay, do they thread into visor metal round tab or just simply press in, like the visor arm?

1 Wild R/T · « **Reply #3 on:** March 05, 2018 - 01:08:09 PM »

They press in... Of they are to loose they fall out & get lost, then your searching for replacements... I have sandwiched the visor in cardboard then put it in a vise & slightly compress the visor to tighten the metal that clamps the end...

BTW the end should be smooth silver argent not chrome.. Paint holds up well since once installed they don't get handled much...

culp71 · « **Reply #4 on:** March 05, 2018 - 01:14:49 PM »

much appreciated

Author Topic: sunvisor tip attachment (Read 946 times)

culp71

sunvisor tip attachment

1 Wild R/T

Re: sunvisor tip attachment

culp71

Re: sunvisor tip attachment

1 Wild R/T

Re: sunvisor tip attachment

culp71

Re: sunvisor tip attachment