front inner seatbelt housing cuda

[culp71]

for a 71 cuda front bucket seats, (auto trans), did they originally have a housing that holds the belt up to inside edge of seat?
if so who has them? what would they call them?
also on the opposing side of the belt (outside front buckets, do the belts run over the hinge or through the hinge covers?

[70chall440]

I believe they are called seat belt stiffeners or perhaps housings but I do not believe they are repopped in mass. Contact this, guy, he either has them or makes them, his name is William Edwards (Bill). He is big time Mopar guy, but is older and has some health issues. He is not fast in responding, so you might want to call him.

http://allmoparseatbelts.com/

[culp71]

will do thank you, do you know if the belts run over the hinge or through the hinge covers?

[70chall440]

Sorry, I don't understand what you are asking me.

[culp71]

thanks I contacted http://allmoparseatbelts.com/  and he assured me that these belt stiffeners where never used on a 71 cuda...he also told me the belts go over the seat hinges not through them.
hey at least that's one last part I need but concerned that the belts will beat up the seat and center console.

[70chall440]

Well Bill certainly would know, that is his forte for sure.