Suspension Upgrade

[ApacheCuda13]

I have just completed an engine swap from a 318 to a 440 in my 73 Barracuda. With that the automatic transmission was changed out for a TREMEC 5 speed. With all of that complete, the front tires are canted outward at the bottom of the tires due to the extra weight of the 440. I am looking for guidance on how to fix that issue. Do I need to get a heavier duty torsion bar? I am looking to upgrade the entire suspension with something like the Hotchkis TVS down the road. Looking for suggestions.

[73440]

http://www.engine-swaps.com/

This Schumacher website should have some info to help.

Larger torsion bars should help with handling.

What brakes system are you running now ?

https://www.qa1.net/suspension/street-performance-racing-suspension-components/mopar-eccentric-camber-bolt-adjusters


http://www.rosevillemoparts.com/index.php/steering--suspension/front-suspension-front-end-kits-and-components-torsion-bars-bumpers-bushings/cPath/222_224?osCsid=323730823dhdnnjbhth8tm94o4

Roseville provides a discount for forum members also

Have you adjusted your eccentric cam bolts on the upper control arms.?

Moog makes offset bushings also. http://www.rosevillemoparts.com/product_info.php/steering--suspension/front-suspension-front-end-kits-and-components-torsion-bars-bumpers-bushings/p/upper-control-arm-bushing-off-set/cPath/222_224/products_id/9102

[ApacheCuda13]

Thanks for the information, I will take a look and see what the site provided says. I've currently have a set of BAER disc brakes all the way around. Haven't adjusted anything on the suspension yet.