Converting from column shifter to floor shifter

[RDF]

I'm converting my column shifter in my 73 'Cuda to a floor shifter and need some advice.  The transmission is a 727 with a cheetah reverse manual valve body and the motor is a 493.  Is it ok to use ANY shifter I'd like or are there certain things I need to make sure the shifter has/doesn't have?  As an example, here's the style I'd like to add to my car:

https://www.autozone.com/shifter-and-shift-accessories/floor-shifter/tci-auto-outlaw-shifter-with-cover-for-powerglide/862575_0_0

[70chall440]

You can use any shifter you like, people have been doing it for a long time. Just remove all of the stock linkage from the column shift (might want to keep it all together). After market shifters are going to use a cable, you will have to punch a hole into the floor to run that down to the transmission.

[RDF]

Thank you 70chall400!!  Much appreciated! 

[70chall440]

Very welcome.