Author Topic: 4spd console location help (Read 1312 times)

2000gt · « **on:** June 13, 2019 - 02:11:22 AM »

Hey guys, hoping you can help me out. Just did a 4 spd swap in my 70 Cuda and added a console. We did not have a 4 speed top plate when installing the console brackets so I used some measurements I got off the site here. My new top plate arrived tonight and now wondering if we installed the console too far forward. Can anyone with a 4spd and console take a couple pics of their shifter in neutral and in second gear from the side so I can see how centered the shifter is in the top plate? Thanks a bunch

73440 · « **Reply #1 on:** June 15, 2019 - 05:13:29 PM »

Have a 73 , can put the console back in and check, not sure if it will be the same , I would think it would be.

73440 · « **Reply #2 on:** June 15, 2019 - 06:02:00 PM »

https://photos.app.goo.gl/ZrmP1nH3QNmEbqLz5

Try this link for photos , description of photos in in lower left corner or click info symbol in upper right corner.

1) neutral
2) 2nd
3) 1st
4) console rear hole
5) end of rule against rear of shifter when in 1st
6) console distance to rear hole
7) console mounting holes

2000gt · « **Reply #3 on:** June 16, 2019 - 01:31:20 AM »

73440 that�s exactly what I needed, thanks so much!

73440 · « **Reply #4 on:** June 16, 2019 - 02:19:48 AM »

:Your welcome , the 4 speed and console are not original to the car , but there are no issues with the shifting.

Author Topic: 4spd console location help (Read 1312 times)

2000gt

4spd console location help

73440

Re: 4spd console location help

73440

Re: 4spd console location help

2000gt

Re: 4spd console location help

73440

Re: 4spd console location help