After Market Moldings vs Original

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: After Market Moldings vs Original  (Read 1042 times)

    Offline money pit

    • Jr. Member
    • **
    • Posts: 256
    After Market Moldings vs Original
    « on: March 31, 2020 - 12:07:43 AM »
    The molding on my windshield and rear window are pretty damaged. The windshield and rear window leaked so the previous owner used a lot of RTV to seal it and attach the molding. The edge of the molding that the molding clips mounts to is pretty bent. In addition, the molding on the rear window doesn't lay flat. Is it better to try to repair the original molding or replace it? Is the after market moldings any good?  Thanks
    Logged


    Offline 70chall440

    • Sr. Resident
    • ******
    • Posts: 6484
    Re: After Market Moldings vs Original
    « Reply #1 on: April 01, 2020 - 11:28:22 AM »
    Which is better depends on several things, are you willing to source new/different ones, how damaged the originals are, etc. All things being equal, if you can find a set for a price you are willing to pay, then go that route.
    Logged
    Current Mopar
    70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
    05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
    Past Mopars
    9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

    Offline money pit

    • Jr. Member
    • **
    • Posts: 256
    Re: After Market Moldings vs Original
    « Reply #2 on: April 01, 2020 - 11:28:35 PM »
    The moldings thenselves look okay from the top. The damage is on the underside where the molding clips on, around the rear window. It looks like someone hit the molding hard because the clips wouldn't engage. In these areas the molding is bent pretty bad. I had heard the after market moldings don't fit that well. Do you have any experience with the after market parts?  I was going to see if I could find a good set of original moldings at the Spring Fling but because of the pandemic it was canceled.   Thanks
    Logged

    Offline 70chall440

    • Sr. Resident
    • ******
    • Posts: 6484
    Re: After Market Moldings vs Original
    « Reply #3 on: April 01, 2020 - 11:44:17 PM »
    So you cannot repair them? I cannot say I have any experience with after market moldings but I don't think I would be afraid to use them. Post some pictures of what you have.
    Logged
    Current Mopar
    70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
    05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
    Past Mopars
    9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

    Offline E-Body Products

    • E-Body Products
    • Sr. Member
    • ****
    • Posts: 1016
    • American Jobs Are Our Children's Future!
      • E-BODY PRODUCTS
    After Market Moldings vs Original
    « Reply #4 on: October 28, 2020 - 08:11:13 PM »
    I bought aftermarket door top moldings and they wouldn’t fit or latch to the clips. I ended up buying original moldings and they snapped right in place. Go for original.

    Send your original moldings for the windows to MCB restoration. They’ll have them looking like new. And you know they’ll fit.


    Sent from my iPhone using Tapatalk
    Logged
    Pages: [1]
    « previous next »