Author Topic: 1970 challenger rad cradle  (Read 527 times)

Offline roy282

  • Jr. Member
  • **
  • Posts: 479
1970 challenger rad cradle
« on: February 02, 2021 - 08:15:14 PM »
Hello my buddy is looking for the driver side front rad cradle section for 70 challenger ac car he's pretty fussy it has to be from a 1970 challenger would someone here happen to have that part? if so how much would it cost him?
Thanks for your time
Rob
1974 barracuda 360 gone
--------------------------------------------------------------------------------
1968 charger 318 gone
--------------------------------------------------------------------------------
1970 barracuda gran coupe 383 4spd Gator in the garage
--------------------------------------------------------------------------------




Offline jimynick

  • Resident
  • *****
  • Posts: 4512
Re: 1970 challenger rad cradle
« Reply #1 on: February 02, 2021 - 09:49:13 PM »
The rad support is composed of 4 parts- the upper and lower tie bars and the side panels. Which ones does he need? As for being fussy, he'd be well advised to Google 70 Challenger rad support and he'll see there's a few suppliers of new parts. AMD sells a complete one for $380 and Classic Industries sells in pieces or complete from $119 to $300. Hope that helps and if he's a real #'s guy, tell him to look out for the body stamping number in the upper tie bar. The zealots cut out the old one and weld it into the new one.  :cheers:

Offline roy282

  • Jr. Member
  • **
  • Posts: 479
Re: 1970 challenger rad cradle
« Reply #2 on: February 03, 2021 - 05:03:07 PM »
Thanks and sorry for wasting time but  my buddy has decided to go with the AMD full piece.
Thanks
Rob
1974 barracuda 360 gone
--------------------------------------------------------------------------------
1968 charger 318 gone
--------------------------------------------------------------------------------
1970 barracuda gran coupe 383 4spd Gator in the garage
--------------------------------------------------------------------------------

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: 1970 challenger rad cradle
« Reply #3 on: February 03, 2021 - 10:43:12 PM »
Good call, tell him to save the VIN stamped on the upper radiator support (the one the runs across the front of the car right in front of the radiator).
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)