Rachels got a problem !

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Rachels got a problem !  (Read 1218 times)

    Offline VPOINTCUDA

    • Full Member
    • ***
    • Posts: 605
    • Wish she were done so I could take her out Ridin!
    Rachels got a problem !
    « on: August 04, 2005 - 09:09:36 PM »
    Hi , Guys
    Miss Rachels got a problem , maybe someone can help.
    I took her out on a Packy run the other day before I started stripping out her guts to get ready for the body work and such.
    She ran great all the way there, but after idling for about 5 minutes while showing off the engine to some interested parties , I tried to get on it a little when I got 'er on the street and she fell flat on her face! Like she just completely ran outta fuel. I'm running a holley electric 119gph pump , adjustable pressure regulator, 3/8 in. line and two 650 cfm edelbroc carbs.I thought maybe she loaded up on fuel , which still may be the case, but it straightened out after a couple miles , but when I jumped on it again , she died on the spot. Any ideas?
    Logged
    " the question isn't  when is he going to stop, but whose gonna stop him!"


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Rachels got a problem !
    « Reply #1 on: August 04, 2005 - 09:43:32 PM »
    are the accelerator pumps working ?
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline VPOINTCUDA

    • Full Member
    • ***
    • Posts: 605
    • Wish she were done so I could take her out Ridin!
    Re: Rachels got a problem !
    « Reply #2 on: August 04, 2005 - 10:46:10 PM »
    YEAH , I GET PLENTY OF FUEL OUTTA BOTH CARBS , I WAS WONDERING IF MAYBE IT WAS VAPOR LOCK?
    IT WAS ABOUT 84 DEGREES THAT DAY. I AM REALLY HOPING THATS ALL IT WAS , BUT IF ANYONE CAN GIVE ME SOME OTHER IDEAS , IT WILL HELP ME TROUBLE SHOOT THE PROBLEM WHEN I GET HER PUT BACK TOGETHER. :dontknow:
    Logged
    " the question isn't  when is he going to stop, but whose gonna stop him!"

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: Rachels got a problem !
    « Reply #3 on: August 07, 2005 - 12:55:22 PM »
    Is this the first time this has happened? It would be nice to know your setup is working correctly, then I would definitely agree with the vapor lock problem. The electric fuel pump can bring it up to the engine bay with no problem, but if it sits there boiling, that's no good.  :nono: Can assume you have headers? That's what I have to worry about when it gets  around 90. I can't get caught in traffic.


      Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline VPOINTCUDA

    • Full Member
    • ***
    • Posts: 605
    • Wish she were done so I could take her out Ridin!
    Re: Rachels got a problem !
    « Reply #4 on: August 09, 2005 - 10:59:42 PM »
    Yeah , Hookers finest!
    It was all working fine , but now all of a suden this happened. I can't really do any more diagnosing right now either. I have the interior gutted and almost all of the glass removed. I'm really hoping it was just a vaporlock situation. I ran the 3/8 inch fuel line in the stock position, but around the headers , I tried to pull it to the outside of the frame rail away from as much heat source as I could.
    I'm going to wait until I get the body done and get her put back together, then I'll start fussing about and see what happens.
    Hey , I want to tune the carbs. the same way as the HEMI and I just can't remember how the heck I did them. I was sure that the front carb mix screws were turned in completely, and then the butterflies were shut down to something like a .023" gap. But I can't remember for sure . Any one out there got a manual for these settings?
    Will these settings work as well for my 440?
    Logged
    " the question isn't  when is he going to stop, but whose gonna stop him!"
    Pages: [1]
    « previous next »