Author Topic: Floor Pan replacement (Read 822 times)

jvhodges · « **on:** August 06, 2005 - 01:34:12 PM »

Heres some pictures of my floor, do you think I should replace just some parts of it or go for the hole ten yards, 3/4 lenght left and right and the rear left and right. Do they make the panel for under the rear seat or do I cut out the bad and weld in some sheetmetal. Theres some guy that sells new 3/4 lenght floors on e-bay for 200.00 for the pair, is that a good price?
Thanks Guys
Jeff

HemiDog · « **Reply #1 on:** August 06, 2005 - 04:25:59 PM »

You will have to fab your own pans or find a donor for the area below the rear seats.� I found a couple places that would sell that section from a donor to me, but they wanted to sell one piece that was the entire left and right section for around $300. I, personally would go ahead and use new 3/4 length pans with the new rears. You will find that replacing the entire pan isn't much harder than patching it. Might even be easier. :thumbs: All of the little holes that look easy to patch, can become nightmares really easy.

jvhodges · « **Reply #2 on:** August 06, 2005 - 05:37:36 PM »

Thanks HemiDog

I think I'll replace with new all I can than fab the back seat area.

BlueStreak_Johnnie · « **Reply #3 on:** August 07, 2005 - 01:38:04 AM »

I'm right there with you, though my rot is worse. Now i just need a few more jobs .... :sleep:

and

Gotta love those barn finds.

Author Topic: Floor Pan replacement (Read 822 times)

jvhodges

Floor Pan replacement

HemiDog

Re: Floor Pan replacement

jvhodges

Re: Floor Pan replacement

BlueStreak_Johnnie

Re: Floor Pan replacement