do I need to brace the firewall

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: do I need to brace the firewall  (Read 896 times)

    Offline 71chmark

    • Full Member
    • ***
    • Posts: 771
    do I need to brace the firewall
    « on: November 05, 2005 - 11:06:25 AM »
    I'm converting my 71 Challenger to a 4-speed.  Do I really need to brace the firewall? It's just a street car.  440 with the scallopped pressure plate.
    I also have the A/F body Hemi 4-speed and aluminum bell housing.  Brewers said they could convert the trans to the e-body. Does this sound OK? I have the clutch/brake pedals out of a 70 Barracuda.  I expect they should bolt right in.  I suppose I'll have to install the engine and trans to see where the pivot point for the frame has to be welded (which I hope I can also get from brewers).

    I posted the 1970 Gran Coupe (see cars for sale) but I don't know how to post pics. I see some are posted as attatchments and some are direct pictures. Could I get some advice here?
    Thanks,
    Mark
    Logged
    I may be schizophrenic,
    but at least I have each other


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: do I need to brace the firewall
    « Reply #1 on: November 06, 2005 - 01:12:33 AM »
    the fire wall should be fine . there is a strap to support the extra extension to support th eclutch pedal & I recommend getting or making that support ,
    Brewers or Passion do good work with 4 spds
     the 70 Cuda pedals will bolt in with the above mentioned bracket
    the frame pivot lines up with the Oval hole in the inner fender
    When you make a post click on additional options just to the bottom left of the window you type in , you can add pix there 
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »