need help !!! - how to remove corrugated cylinder ????

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: need help !!! - how to remove corrugated cylinder ????  (Read 1121 times)

    Offline bs549

    • Jr. Member
    • **
    • Posts: 82
    need help !!! - how to remove corrugated cylinder ????
    « on: December 30, 2005 - 10:22:03 AM »
    ...from the steering column on my 74 Cuda?  I've removed the nut, but the cylinder is pressed onto the splined steering wheel shaft.
    Logged


    Offline Cannibal94

    • Full Member
    • ***
    • Posts: 834
    Re: need help !!! - how to remove corrugated cylinder ????
    « Reply #1 on: December 30, 2005 - 10:23:37 AM »
    You need to use a steering wheel puller.  Just like a pully puller.
    Logged

    Offline hotrod98

    • Full Member
    • ***
    • Posts: 825
      • Maniac Musclecars
    Re: need help !!! - how to remove corrugated cylinder ????
    « Reply #2 on: December 30, 2005 - 10:37:25 AM »
    You will need one of those small steering wheel removers that you find at auto parts stores. It will need to be small enough to fit down in the can. Sometimes you have to grind the ends of the puller to fit.
    Logged
    1971 Cuda, Tor-red, Bench seat
    1971 Cuda Drag Car
    1973 Cuda Clone, EFI/OD Limelight
    1970 Superbird (Yes, it's real) Black Ice
    1971 Barracuda Sassy Grass Green (sold)
    1970 Challenger RT SE 383 Plum Crazy
    1969 Road Runner Hardtop
    1968 Road Runner Coupe (sold)

    www.maniacmusclecars.com

    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: need help !!! - how to remove corrugated cylinder ????
    « Reply #3 on: December 30, 2005 - 10:37:52 AM »
    Yes that is correct!!  Need a puller to get that off!   :cheers:
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: need help !!! - how to remove corrugated cylinder ????
    « Reply #4 on: December 30, 2005 - 12:43:55 PM »
    you can use a normal puller too If you use 6" bolts & a longer center bolt in the puller
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline bs549

    • Jr. Member
    • **
    • Posts: 82
    Re: need help !!! - how to remove corrugated cylinder ????
    « Reply #5 on: December 30, 2005 - 04:03:26 PM »
    Thanks a bunch!   Went down to AutoZone and borrowed a wheel puller. :working:
    Logged
    Pages: [1]
    « previous next »