Author Topic: Dark burnt oringe mettalic  (Read 4000 times)

Offline dazza

  • Jr. Member
  • **
  • Posts: 18
Re: Dark burnt oringe mettalic
« Reply #15 on: December 30, 2005 - 04:43:39 PM »
R/T hedkace. I hope to have the body in paint in about 1 year but will send in some progress pics as it happens. Hay best of luck with yours.




Offline js23nob

  • Jr. Member
  • **
  • Posts: 169
Re: Dark burnt oringe mettalic
« Reply #16 on: January 01, 2006 - 07:04:37 PM »
Hi Daz,
Where abouts in aussie are you?
I have a R/T Challenger the same colour as yours (DBOM), Iam a spray painter and the only colour that is close in Aus is bronze wine off a xw ford GT,  :thinkerg:just a little dark, but a good colour to start with.I sprayed a colour card out and its very close to my original colour.
Let me know if you find a better colour :bigsmile:

Anton
Mopar or no car

Offline dazza

  • Jr. Member
  • **
  • Posts: 18
Re: Dark burnt oringe mettalic
« Reply #17 on: January 04, 2006 - 06:04:02 AM »
Hi anton.

First of im in Canberra not to far from you. The colour that you found on the xw GT i found a car in that colour but like you said it is a bit dark but could be worked with. You can order the correct colour I think from year one in the states, but would cost alot to pay for it and then freight on top to get it here. I have also seen a colour similar on i think a 2003 toyota lexen something to look in to being spray painter. Is your R/T challenger on the road? can you send in a photo?

Daz.