Author Topic: Adapting the Honda S2000 "Engine Start" button into challenger  (Read 731 times)

Offline kowalski

  • Jr. Member
  • **
  • Posts: 173
  • Challenger=SCCA Trans Am Homologation Special
Adapting the Honda S2000 "Engine Start" button into challenger
« on: January 15, 2006 - 04:28:12 PM »
Could someone help me adapt a s2000 Engine Start button into my chally?  I suck at wiring and all i need to do is eliminate the key start and wire it to the button but i'm scared to start hacking without advice!!!!
1970 318 bored .060 over edelbrock performer intake ported and polished 360 J heads 2.02 intake 1.60 exhaust double springs carter hi cap fuel pump edelbrock victor series water pump MSD 6AL flotech headers




Offline Killer_Mopar

  • Sr. Member
  • ****
  • Posts: 1886
Re: Adapting the Honda S2000 "Engine Start" button into challenger
« Reply #1 on: January 15, 2006 - 06:36:50 PM »
Dont really have advice, but just a little suggestion. If I remember right, the S2000 has a grey/silver start button. While the Ram SRT-10 and Viper have a red button. Not only is it mopar, but it would be cool to say "Dont push that little red button"  :lol:
70 Challenger R/T SE - The never-ending project........