440 crank pulley with A/C

[Stacked440]

I have a box of about 10 different mopar pulleys, some are small block some big block etc etc.  Anyone have a picture of a big block main pulley with A/C?

[gomangoRT/SE]

I have my pulley out in the garage.  If noone posts a pic in a day or so I will hunt it up and post a pic.   The 440 pulley with A/C has four grooves.

[Robb]

yup!  4 grooves.

There is a different pulley for the cast crank vs the forged crank.  (slightly different bolt pattern)  440source.com has some comparison pics

[gomangoRT/SE]

Hmmm I didnt recall that.......  heck now I am paranoid I may have a cast crank pulley.........well shoot.   I guess I need to find 440source.com and look at the difference between the two

[gomangoRT/SE]

PS:    Robb, your car is an RT/SE too isnt it.   My car like yours came out with that trim molding down the side, but had been taken off before I got it.   My car was originally a gomango with a white vinyl top.     I am thinking I am going back to the white stripe down the side with the white vinyl top....... or go with the black vinyl top and black hood blackout design.

[Groundhawg]

I believe the forged steel crank pulley has six holes (one of them being offset) and the cast has six holes, all being symmetrical with each other.

[Robb]

PS:    Robb, your car is an RT/SE too isnt it.   My car like yours came out with that trim molding down the side, but had been taken off before I got it.   My car was originally a gomango with a white vinyl top.     I am thinking I am going back to the white stripe down the side with the white vinyl top....... or go with the black vinyl top and black hood blackout design.

Mine is actually just a SE with a L code 383 in it originally (pulled it out and put the 440 in).  But it had all the R/T parts in it already, all I needed was the hood and some R/T badges, so what the heck.  Now its an R/T with pinstripes    It has the v7w pinstripes which are white, but not molding.   I like how they accent the lines.

If I ever paint my car I will try an R/T stripe but I dont know if it will be black or white.   Ive seen and like both with the black top.  I like the white tops too.

[Robb]

I believe the forged steel crank pulley has six holes (one of them being offset) and the cast has six holes, all being symmetrical with each other.

exactly.