Author Topic: Original Vinyl top preservation  (Read 2175 times)

Offline GEORGIA CUDA

  • Jr. Member
  • **
  • Posts: 48
Original Vinyl top preservation
« on: January 25, 2006 - 08:27:17 AM »
Hi everyone,

I posted this question on Moparts.com, but it was three pages back in about 2 hours so no one saw it.  So now I have come back "home" to post it here. I purchased an original owner '67 GTX (I know it is not an E-body!) with original paint and a perfect black vinyl top.  Does anyone have suggestions on how to clean and preserve the original vinyl?  Also, should I be concerned about the vinyl shrinking if it is in the sun after being stored for many years?

Thanks,
Jason 




Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Original Vinyl top preservation
« Reply #1 on: January 25, 2006 - 09:12:28 AM »
 :dunno: I'm wondering the same question.

I was told that Armor All actually dries out vinyl and makes it crack.  Is it true?  (Sorry, not trying to hijack thread. :) )
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Rev-It-Up

  • Global Moderator
  • Permanent Resident
  • *****
  • Posts: 10601
  • Member Since 2/20/02
Re: Original Vinyl top preservation
« Reply #2 on: January 25, 2006 - 09:45:11 AM »
I have also heard that about armor-all.  I quit using it a long time ago and switched to McGuires vinyl stuff.  So far it works great!
Rev-It-Up                                                             Yes, I'm a girl!
                         


Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Original Vinyl top preservation
« Reply #3 on: January 25, 2006 - 10:20:30 AM »
I remember back in the 70's(the last time I had a vinyl top), there was a paste like product to preserve it. I can't remember the name of it, but I'm sure it's no longer made. Basically, sun is your worst enemy here, especially if the vinyl is that old.

  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Original Vinyl top preservation
« Reply #4 on: January 25, 2006 - 10:23:08 AM »
So what your vinyl roof really needs is some SUNBLOCK!  j/k     

Offline Rev-It-Up

  • Global Moderator
  • Permanent Resident
  • *****
  • Posts: 10601
  • Member Since 2/20/02
Re: Original Vinyl top preservation
« Reply #5 on: January 25, 2006 - 12:00:20 PM »
One problem I have had with some vinyl protectant products is that if it rains or your wash your car, the residue (milky and watery) comes off onto your paint and dulls it a little.  So far, Meguiars hasn't done that, so I've stuck with them.  Here's a page with all their vinyl products.  I don't know about this company, but they had a listing and description of all the Meguiars vinyl stuff for you to read. http://www.detailsupplydepot.com/scripts/depot.exe?pgm=dsd29-10.bbx
Rev-It-Up                                                             Yes, I'm a girl!
                         


Offline mopar-or-no-car

  • Full Member
  • ***
  • Posts: 779
Re: Original Vinyl top preservation
« Reply #6 on: January 25, 2006 - 12:12:00 PM »
Armoral IS definaltely terrible!! I use to use it on my dashpad. The pad was perfect! I stopped using it for just a little while then it CRACKED!! real bad!! Once you start that stuff you need to use it religiously!!  as far as vinyl tops go my ex use to use baby oil! but it was garaged all the time! The top always looked great and never cracked!! I know it sounds wierd but it seemed to have worked! he rubbed it on the top with a cloth and it soaked in and moisturized the top!!  just my wierd  :2cents:

Offline GEORGIA CUDA

  • Jr. Member
  • **
  • Posts: 48
Re: Original Vinyl top preservation
« Reply #7 on: January 25, 2006 - 06:15:12 PM »

Thanks for the suggestions everyone. I have a buddy who has a NCRS '67 427 Corvette with a hardtop that has black vinyl and he uses KIWI black shoe polish.  He says he rubs it in and buffs it off, just like it's his wingtips. I also remember seeing that trick in a Corvette show prep book somewhere.  Has anyone else ever tried it?   I also saw something called Ragg-Topp, but I think that it is more for vinyl convertible tops, but is it really any different?

Jason

Offline Rev-It-Up

  • Global Moderator
  • Permanent Resident
  • *****
  • Posts: 10601
  • Member Since 2/20/02
Re: Original Vinyl top preservation
« Reply #8 on: January 25, 2006 - 08:16:43 PM »
I would try to find something with some uv protection.
Rev-It-Up                                                             Yes, I'm a girl!
                         


Offline Total BS

  • Full Member
  • ***
  • Posts: 742
  • '71 Carrabuda Baby!
Re: Original Vinyl top preservation
« Reply #9 on: January 25, 2006 - 10:05:52 PM »
Back in the seventies I used black shoe polish on the vinyl roofs and tires religiously. It worked out well then.  We also used to use that clear liquid floor wax. I think it was Johnsons. BUt I don't think I would try that today.

Check in a boat store or on the web for Marine Vinyl Protectants. They have a lot more sunscreen than standard vinyl protectorants.
1971 'Cuda 383
1970 Chevelle SS LS6
1999 Durango
-New Joisey-