News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: holley carb question  (Read 901 times)

    Offline madness

    • Jr. Member
    • **
    • Posts: 40
    holley carb question
    « on: January 31, 2006 - 09:56:37 PM »
    i have a holley 750 double pumper carb on my 340 my question is it only has a vacume port for the advance and one port in the back for break booster i need to hook up the pvc will a tee work for both pvc and booster thanks for the help
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: holley carb question
    « Reply #1 on: February 01, 2006 - 12:39:26 AM »
    do you have a port in the intake you can use for the brake booster ?
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline madness

    • Jr. Member
    • **
    • Posts: 40
    Re: holley carb question
    « Reply #2 on: February 01, 2006 - 10:10:06 AM »
    yes cp i am running a air gap the port is in the runner to the cyl am not sure if thats a good place to draw vac from
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: holley carb question
    « Reply #3 on: February 01, 2006 - 11:30:08 AM »
    I would not use the intake port for PCV butit works great for the brake booster vacuum
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline madness

    • Jr. Member
    • **
    • Posts: 40
    Re: holley carb question
    « Reply #4 on: February 01, 2006 - 09:47:44 PM »
    thank you cp for the help i was thinkin the same thing pvc has constant vac draw booster does not the tee idea would not work with the pvc drawing all the time
    Logged
    Pages: [1]
    « previous next »