Anybody repop BS

[Tropicalcats]

Is it possible to get a broadcast sheet redone?

[hemi71]

You can find blanks on e-bay from time to time...but a redone Broadcast sheet with all the options typed in?  Sounds like that might be opening pandora's box...no matter how honorable your intentions are. There are too many people out there who would just love to be able to build a broadcast sheet with all the good "stuff".

That said, i do believe there is a guy who has blanks and will make one up for you...but it's going to be $$$$$ to do it.

[attachment deleted by admin]

[Tropicalcats]

I always forget the dark side of people. I do have some blanks and I have been able to fill in alot of my stuff my BS was glued to the floor and will need to be taken off when its time for paint.

[Andrew]

Cant you just clearcoat (or some other transparent stuff) over it?

[torredcuda]

There is a guy over on Moparts that will do them but not sure of his username.

[Swedefish]

Is there not any way to scan it of the floor with some sort of mobile scanner? At least then you have a copy of the original BS although it`s not complete.Better than nothing ,wich`s the case for me.

[Tropicalcats]

I have taken several pictures of it. I am not sure you could even clear coat it the BS is so brittle the brush stroke would probably just pull it apart. 

[whitesatinmopar]

I'd try and preserve the original right where it is..................there is a clear coat in rattle bomb form, with a little practice on other paper objects it may be worth a try.............noting to loose. Good luck.

[JS27N0B]

I agree, try to save what you have.
Can you not find another one in the car anywhere(like in the front seat backs)?

[Tropicalcats]

I agree, try to save what you have.
Can you not find another one in the car anywhere(like in the front seat backs)?

no other build sheet and have the car pulled apart all except the dash but I have looked under it and do not see another. I will take good pictures and be thankful that I now know what kind of wheels my car came with.
 Since most La cars did not have any build sheets I should be happy I will end up with a picture and some torn fragments.

[whitesatinmopar]

Your dash,............just maybe? When I stripped my Charger for the resto I found my build sheet under the front bucket a rather typical place, but when the dash was removed, taped on top of the clove box insert was another build sheet. Now here is the irony in this, the sheet taped to the clove box was not for my Charger  ? Either the dash in my car was actually intended for another Charger on the production line or too perhaps someone over the years replaced the clovebox insert with one from another car? At any rate check it out, it may be on top of that insert and you will not see it by just looking under the dash  ??