Ah! I didn't know you guys posted here. Cool.
Do you plan to sell the kit for home install, or will this be an "XV install only" kind of thing?
We'll sell kits but there is a bit of fabrication and welding involved. Detailed instructions and templates will be included. Hardest part is the rear as it needs to be set up correctly.
An experienced shop would have no problem doing it, but probably not something to learn on if you haven't done this type of work before.
We may change the design of the rear to make it a bit easier, but there will be some welding any way you slice it. There were too many compromises otherwise. We think we might be able to do it so that it can all be bolted on the car and then taken to be welded, but not totally clear yet if that is feasible. Front can definitely be done that way.
If people don't have someone they know can do it, or can't do it themselves, we'll likely have a very small number of shops we can recommend and we can also do the install if need be. I already know someone in Florida I'd have no issue sending people to.
John Buscema
XV Motorsports
www.xvmotorsports.com
