News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: right angle oil filter adapter  (Read 769 times)

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    right angle oil filter adapter
    « on: May 03, 2006 - 03:45:47 PM »
    How do you remove the right angle oil filter adapter on a small block?
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)


    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: right angle oil filter adapter
    « Reply #1 on: May 03, 2006 - 03:55:32 PM »
    ONE BIG BOLT RIGHT IN THE CENTER. YOU WILL NEED NEW GASKETS TO PUT BACK ON. I HAD A LOT OF LEAKS TILL I REPLACED WITH OE GASKETS, DOUBT IF THEY ARE AVAIL. FROM DC ANYMORE.  :eek4:
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    Re: right angle oil filter adapter
    « Reply #2 on: May 03, 2006 - 05:06:37 PM »
    would it be easier just to not use it at all and go straight to the block.
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: right angle oil filter adapter
    « Reply #3 on: May 04, 2006 - 01:55:09 AM »
    you would need the factory adaptor plate off another small block & depending on the exhaust you have you may not have clearance for the oil filter without the adapter 
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: right angle oil filter adapter
    « Reply #4 on: May 16, 2006 - 08:53:31 PM »
    I bought the gaskets from Mancini Racing.  I can't remember if they were MP parts or not.
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD
    Pages: [1]
    « previous next »