News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Small block pushrod diameters with Edelbrock heads  (Read 748 times)

    Offline mrbill426

    • Full Member
    • ***
    • Posts: 775
      • All Around Mopars
    Small block pushrod diameters with Edelbrock heads
    « on: May 15, 2006 - 09:24:14 PM »
    For anyone using Edelbrock heads on their small block (340 in my case), will the geometry accept 3/8" diameter pushrods, without modifications, or are 5/16" the max?

     :working:
    Logged
    MOPAR or NO car!

    '72 'Cuda 340, white on white
    '72 Sebring; bracket project
    '64 Imperial Crown black on black
    '66 Imperial Crown; parts car


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Small block pushrod diameters with Edelbrock heads
    « Reply #1 on: May 15, 2006 - 10:32:12 PM »
    not sure , I have used 5/16
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Follicly Challenged

    • Jr. Member
    • **
    • Posts: 153
    Re: Small block pushrod diameters with Edelbrock heads
    « Reply #2 on: May 16, 2006 - 09:38:56 AM »
    Only ever used the 5/16".

    Why would you want to go to 3/8" ?

    Just get a better alloy 5/16 if it's a strength issue ?  Plenty strong enough even for Roller spring rates !
    Logged
    Pages: [1]
    « previous next »