Author Topic: Correct 72 Cuda Buckets?  (Read 1015 times)

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Correct 72 Cuda Buckets?
« on: May 23, 2006 - 10:33:08 PM »
So I buy this 72 Cuda that sat around for a while.  It had these Buckets in pic-seats1, with a plastic back.  I have a friend giving me his 72 Cuda seats, in pic seats2, vinyl backs, different latch.  The seat patterns match.  Did both sets come in '72s?

Rob

P.S.  I found pic 3 on my hard drive, I laughed, then had to send it up too.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0





Offline pettybluecuda

  • Jr. Member
  • **
  • Posts: 284
  • www.cudaregistry.com
    • 70-74 barracuda-cuda' registry
Re: Correct 72 Cuda Buckets?
« Reply #1 on: May 23, 2006 - 10:44:56 PM »
Hello,
The top one is a 72 and the bottom is a 73 or 74

Later,
Jesse
cudaregistry.com

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: Correct 72 Cuda Buckets?
« Reply #2 on: May 24, 2006 - 06:36:00 AM »
Thanks Jesse.   


What about the middle one? :roflsmiley:

Rob
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Correct 72 Cuda Buckets?
« Reply #3 on: May 24, 2006 - 06:54:54 AM »
 :roflsmiley:  :roflsmiley:  :roflsmiley:

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Correct 72 Cuda Buckets?
« Reply #4 on: May 24, 2006 - 11:38:25 AM »
 :roflsmiley:  I had to think a little bit at first.....
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Killer_Mopar

  • Sr. Member
  • ****
  • Posts: 1886
Re: Correct 72 Cuda Buckets?
« Reply #5 on: May 24, 2006 - 03:15:08 PM »
Hello,
The top one is a 72 and the bottom is a 73 or 74

Later,
Jesse
cudaregistry.com

What he said. To be sure check the springs on the base. The 72 base should have more springs in a different layout then the 73-74 seat.
70 Challenger R/T SE - The never-ending project........

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: Correct 72 Cuda Buckets?
« Reply #6 on: May 24, 2006 - 03:26:29 PM »
Thanks Guys..

Rob
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0